Crevo Products

- 创景产品 -

CV8197 High performance silicone adhesive

Long press to look detail

Long by picture,save to album

Please wait while the picture is loaded
Long by picture save/share
CV8197 High performance silicone adhesive Latest productsphotovoltaic
CV8197It is a high performance silicone curable adhesive at room temperature. Two component, room temperature alcohol curing, rapid deep curing Excellent electrical insulation Non corrosive to any metal substrate The paste is not flowing, and it is e
CV8197 High performance silicone adhesive Latest productsphotovoltaic
CV8197It is a high performance silicone curable adhesive at room temperature. Two component, room temperature alcohol curing, rapid deep curing Excellent electrical insulation Non corrosive to any metal substrate The paste is not flowing, and it is e
Parameters
型号:CV8197比重(23℃):A:1.3~1.4 B:1.0~1.1 g/cm³表干时间:10~25min硬度:40~55A断裂伸长率:>200%拉伸强度:>2.0MPa完全固化时间:24hr
Detail


ModelTypical applicationAdvantageAcquired certification
CV8197Component border sealing, junction box bonding, double glass hook structure bondingTwo componentUL/RoHS
Alcohol curing
Fast curing
Thixotropic material
Excellent mechanical properties and reliability
Low odor, no pollution



Product characteristics

CV8197 is a high performance silicone curable adhesive at room temperature.

Two component, room temperature alcohol curing, rapid deep curing

Excellent electrical insulation

Non corrosive to any metal substrate

The paste is not flowing, and it is easy to use

The silicone elastomers formed after curing have very strong adhesion to most of the substrates

Used in a wide range of temperatures (-55 degrees C to 180 degrees C)

Meet the requirements of RoHS

application area

CV8197 has a very wide range of applications. This high-performance, fast curing organic silicone for electronic assembly,

Industrial materials such as reinforcement and sealing bring high efficiency and high quality.

Bonding of electronic components

Solar module seal

Lamp assembly

Assembly of automotive components

Assembly of general parts


Product performance

 Before curing

colour

density

 A  componentWhite / Black1.4g/ml 
B  componentWhite / Black1.01g/ml 

Curing process

Curing systemDe alcohol type
volume ratio10:1 
Operating time25min
Curing rate2h
Service temperature5~40°C

After curing

hardness40邵氏A
Applicable temperature range-55~180°C
tensile strength2.5Mpa
elongation at break300%
100% modulus of extension0.8Mpa

Bonding property  

This product is compatible with most glass, ceramic, steel and plastic surfaces

The sprayed aluminum can be bonded well

Bonding on aluminum............ 100% cohesive failure

Bonding on TPT material...... 100% cohesive failure

Bonding on PPO material...... 100% cohesive failure

In the UV aging and high temperature and high humidity (85 oC/85 RH) 1000 hours aging, no change in the adhesive properties of the above materials was found.

 
Electrical properties

breakdown voltage22KV/mm
Volume resistance 
9E+14ohm.cm
Dielectric constant3.0@50Hz
Tangent of dielectric loss介质损耗正切值 
0.003@50Hz


型号:CV8197比重(23℃):A:1.3~1.4 B:1.0~1.1 g/cm³表干时间:10~25min硬度:40~55A断裂伸长率:>200%拉伸强度:>2.0MPa完全固化时间:24hr


Telephone:+86-512-52505858

Mail:hui.tang@Crevo.cn

Address: Zhongtian Road, E District, Chang Kun Industrial Park, Sha Jia town, Jiangsu, Changshou City, China

Copyright © 2017 Crevo Inc. All Rights Reserved.             JiangSu CREVO science& Technology Co., Ltd.     苏ICP备10094667号