Crevo Products

- 创景产品 -

CREVO709 High performance silicone curabl...

Long press to look detail

Long by picture,save to album

Please wait while the picture is loaded
Long by picture save/share
CREVO709 High performance silicone curable adhesive at room temperature Latest productsElectronicphotovoltaic
CREVO709High performance silicone curable adhesive at room temperature Dealcoholized one component room temperature curing silicone rubber Excellent weather resistance.
CREVO709 High performance silicone curable adhesive at room temperature Latest productsElectronicphotovoltaic
CREVO709High performance silicone curable adhesive at room temperature Dealcoholized one component room temperature curing silicone rubber Excellent weather resistance.
Parameters
型号:CREVO709比重(23℃):1.38~1.42表干时间:10~20硬度:35~50断裂伸长率:>400拉伸强度:>2.2完全固化时间:24
Detail

ModelTypical applicationAdvantageAcquired certification
CREVO709Bonding and fixing of electronic componentsOne componentTUV/UL/RoHs
Alcohol curing
Excellent mechanical properties and reliability
Low odor, no pollution






Product characteristics

CV709 is a high performance silicone room temperature curing adhesive

Oxime type one component room temperature curing silicone rubber

Excellent weather resistance

High thixotropy

After curing, it has good adhesion to the substrate of solar modules

Environmental protection requirements for ROHS through TUV

Through UL authentication E339949



application area

Solar panel frame seal

Bonding of solar backplane to junction box

Seals for general industrial assembly



 Before curing

Curing system
Oxime type
Appearance
Paste
colour
Black, white
density
1.38~1.42g/ml
Extrusion rate
 30~80g/min
Sagging flow
 0mm  

(The extrusion rate of 3.18mm smeco test sharp beak, the test pressure is 0.3Mpa) 


Curing process

Once it gets in contact with the moisture in the air, it starts to solidify

Surface drying time
5~15min
Complete cure
48hours
Service temperature
5 to 40 degrees C

The above tests were carried out at 25 C relative temperature of 50%


After curing

After 3 days of curing, the mechanical properties (temperature 23 degrees C, relative temperature 50%)

density
1.38~1.42g/ml
Service temperature range
-55~200°C
hardness
40~55 邵氏
tensile strength
≧1.8 MPa 
elongation at break
300~600% 
Bonding shear strength of aluminum sheets
≧ 1.5Mpa 

Bonding properties: This product has a good bond with most glass, ceramic, steel, polar plastic surfaces and metals


Electrical properties

Double 85 aging 2000 hours later

breakdown voltage
≧20 KV/mm
Volume resistance
 9E+14ohm.cm
Dielectric constant
3.1@50Hz
Tangent of dielectric loss
0.003@50Hz
hardness
>30 邵氏
tensile strength
>1.2MPa 
elongation at break
>300%

型号:CREVO709比重(23℃):1.38~1.42表干时间:10~20硬度:35~50断裂伸长率:>400拉伸强度:>2.2完全固化时间:24


Telephone:+86-512-52505858

Mail:hui.tang@Crevo.cn

Address: Zhongtian Road, E District, Chang Kun Industrial Park, Sha Jia town, Jiangsu, Changshou City, China

Copyright © 2017 Crevo Inc. All Rights Reserved.             JiangSu CREVO science& Technology Co., Ltd.     苏ICP备10094667号